Shenzhen Huarong Keyuan Electronic Technology Co., Ltd.  ·  National High-Tech Enterprise Mobile / WeChat +86 18123724123ContactSINCE 2015
Standard & Linear Power Supply Series

HRGL · Slim Driver with DIP Switch

HRGL is a slim DIP-switch driver with 24V output at 100–600W, designed for high-power linear lighting in confined ceiling voids.

IP20ON-OFF 100–600W7 models
HRGL Slim Driver with DIP Switch product photo

Technical specifications

Series codeHRGL
Input voltage170-260 / 170-264VAC
Output voltage24V
Power range100–600W
IP ratingIP20
Dimming methodON-OFF
ModelsHRGL-100/150/200/300/400/500/600-24 · 7 models
Catalog pageP10
Warranty3-year warranty (subject to purchase contract)
Sizing tip: Confirm output voltage (12V / 24V / 48V / constant current), power headroom (≤80% loading recommended) and IP rating before fixing the model — see power headroom and voltage-drop engineering.

Key features

  • Ultra-slim housing saves installation space
  • DIP switch settings for fast on-site commissioning
  • 100–600W high-power range
  • 24V constant-voltage output

Model numbering

The catalog uses a consistent SERIES-WATTAGE-OUTPUT pattern, e.g. HRS-200-24 means the HRS series, 200W, 24V output; HRC-32-42 means HRC constant-current 32W, 42V; HRGL-100/150/200/300/400/500/600-24 follows the same rule — the trailing 12 / 24 / 48 is the output voltage. Confirm output voltage, power headroom (≤80% loading recommended) and IP rating before fixing the model — see power headroom and voltage-drop engineering.

Related series

Typical applications

High-power linear lighting, commercial LED strips, recessed ceiling installation, exhibition lighting

For scenario-wide selection see the six solutions, or contact an engineer with your wattage, output voltage, dimming protocol and IP rating.

Related technical guides

FAQ

Frequently asked questions

What is the HRGL series?

HRGL is a slim DIP-switch driver with 24V output at 100–600W, designed for high-power linear lighting in confined ceiling voids.

Which models are available in HRGL?

Catalogue page P10 lists 7 individual models spanning 100–600W with 24V outputs; the rule is SERIES-WATTAGE-OUTPUT. High-wattage versions may be 24V only — follow the catalogue listing and the matching datasheet.

What are the IP rating and input voltage of HRGL?

Protection rating IP20, input voltage 170-260 / 170-264VAC, output 24V.

Where is HRGL typically used?

High-power linear lighting, commercial LED strips, recessed ceiling installation, exhibition lighting.

What do HUARON products cost, and how can I get a quotation?

HUARON drivers are project-based products. Formal quotations are issued by our engineers against the exact model, quantity, required approvals, lead time and delivery terms; quotations are issued per project and online checkout is not offered. Send the model and quantity by mobile / WeChat +86 18123724123 or email [email protected]; the quotation states the applicable configuration, currency, tax treatment and validity.

Catalogue Models

HRGL — Complete Model List

Every model as listed individually in the product catalogue, ready for selection and enquiries.

Model rule: series - power step - output suffix. The 7 models below are listed individually on catalogue page P10, not generated by mechanically combining wattage and voltage.

OutputCatalogue-listed models
24V constant voltageHRGL-100-24HRGL-150-24HRGL-200-24HRGL-300-24HRGL-400-24HRGL-500-24HRGL-600-24

Six things to confirm before enquiring

Provide these together and our engineers can match the exact model and send the matching datasheet straight away.

  1. Output voltage

    Confirm 12V / 24V / 48V constant-voltage or 30–42V constant-current. The two are not interchangeable.

    Read the guide ›
  2. Power and headroom

    Select one step above total luminaire load; keep loading at or below 80% and check temperature derating.

    Read the guide ›
  3. IP rating

    IP20 for dry indoor use; IP67 for outdoor, damp or wash-down areas, with matched cable glands.

    Read the guide ›
  4. Dimming protocol

    Identify the controller protocol: TRIAC, 0-10V, DALI DT6/DT8, or non-dimmable.

    Read the guide ›
  5. Mains and region

    Check local mains range (100-130 / 170-264VAC or 120-277VAC).

    Read the guide ›
  6. Compliance documents

    Confirm required approvals for the destination market and request certificate numbers plus current datasheets.

    Read the guide ›

Technical documents available

Chinese / English datasheetIssued per exact model, including electrical data, wiring and derating
Product certificatesCCC / CE / RoHS / UKCA / FCC / ETL / CB / BIS / SAA as applicable
Selection and wiring guideChinese and English installation notes with wiring diagrams
Label and packing informationLabel markings, packing method and carton specification, supplied per order

Technical documents are supplied by our engineers against the exact model so that the latest revision is used; they are not distributed as public downloads.

Quality and warranty: Seven controlled stages from incoming material to dispatch, with computer-monitored burn-in racks; standard products carry a three-year warranty, subject to the purchase contract. See process capability and quality control.

Request datasheets and certificates by model

Pricing · quotation per project

These are project-based LED drivers. Pricing depends on the exact model, quantity, required approvals and lead time; formal quotations are issued by our engineers per project. Online checkout is not offered. Share the model and quantity to receive a quotation stating configuration, currency, tax treatment and validity.

Request a quotation