Shenzhen Huarong Keyuan Electronic Technology Co., Ltd.  ·  National High-Tech Enterprise Mobile / WeChat +86 18123724123ContactSINCE 2015
Solution · Malls · Retail · Offices

Commercial Lighting

Commercial lighting should prioritise five-in-one dimmable drivers (TRIAC / 0-10V / CCT / DALI DT6 / DT8), so one hardware platform covers phase-cut, analogue and DALI bus wiring and reduces retrofit cost from inconsistent protocols across zones. High-frequency PWM ripple suppression is also essential to avoid banding on phone and camera footage.

Commercial Lighting application scene

Pain points on site

  • Inconsistent dimming protocols across zones drive up rewiring cost
  • Banding on camera and phone footage hurts live streaming and product presentation
  • Continuous full-load operation causes thermal runaway and short service life

How HUARON addresses it

Use HRS premium five-in-one as the main platform, with HRSW (IP67) for skylights and facades, HRGL slim for recessed ceilings, and HRL linear for light troughs.

Value delivered

A single dimming platform reduces selection and inventory cost; flicker-free output protects image quality; full rated power, long-life capacitors and a 3-year warranty lower maintenance expense.

Typical applications

Mall atriums, chain retail stores, office common areas, supermarket fresh-food counters

Recommended series

Frequently asked questions

How do you choose LED dimmable drivers for malls and chain stores?

Commercial lighting should prioritise five-in-one dimmable drivers (TRIAC / 0-10V / CCT / DALI DT6 / DT8), so one hardware platform covers phase-cut, analogue and DALI bus wiring and reduces retrofit cost from inconsistent protocols across zones. High-frequency PWM ripple suppression is also essential to avoid banding on phone and camera footage.

Which power supply series are recommended?

Use HRS premium five-in-one as the main platform, with HRSW (IP67) for skylights and facades, HRGL slim for recessed ceilings, and HRL linear for light troughs. See the corresponding product pages for exact models.

What value does this solution deliver?

A single dimming platform reduces selection and inventory cost; flicker-free output protects image quality; full rated power, long-life capacitors and a 3-year warranty lower maintenance expense.

Discuss this scenario with an engineer

Glossary

Key terms

One-line definitions of the industry terms used on this page.

TRIAC dimming
TRIAC dimming is a method that adjusts output power by phase-cutting the AC mains, requiring no extra control wire.
DALI DT6
DALI DT6 is the digitally addressable single-colour dimming command set defined by IEC 62386, supporting addressing, grouping and scenes.
High-frequency PWM ripple suppression
High-frequency PWM ripple suppression is a technique that removes visible flicker and camera banding by raising the PWM frequency into the kilohertz range.